2) Insert the key turn from ACC to ON 8times,in 10 seconds,stay on ON state the 8th time;
3) Once hear the power window sounds,press any key of remote,and you will hear another sound from power window the same time;
4) If you have other remote,you need set at the same time,after you hear the sound pressing 1st remote,then press any key of 2nd remote,go on as this,you can study 4 remotes once a time;
5) Turn key to OFF state then put out,all setting finished.
The steps:
1) Connect and switch on the power supply
2) Press the 5 th key twice and press the 1st key once
3) Begin to input the client s 1st key (Press the key until the frequency displayed) press the 5th key once. Input the client s 2nd key press the 5th key once input the client s 3rd key the rest deduced, having finished the inputing process, press the 5th key twice USE NO. X remote having inserted NO.. X remote, Press the 5th key twice WRITE OK
4) Pull out the remote, press the duplicator 4th key FREQ MHz
5) Put the copied remote on the duplicator, press any key once---APPEARING FREQUENCY
6) Put the new remote on the duplicator, use ceramic aligner tool to rurn round while capacitance until the digital reach the copied remote. Having finished the adjustment, press the 1st and 2rd onceat the same time, the light flash once, then press any key, the light light, over
Notes: Need to combined with car remote control duplicator (S-CMS-5010A/S-CMS-5010B) to use
