DC24V 100W Mini Lathe Bead Polisher Machine for Wood DIY Rotary Tool-EU Plus

Description:

24V 100W Mini Lathe Beads Polisher Machine for Wood Woodworking DIY Rotary Tool
Mini DIY Polishing Cutting Buddha Beads Woodworking Lathe
Micro-multi-function lathe, small and multi-functional, convenient
High precision, stability, low noise
Acrylic dust cover, super convection cooling holes

Specification:

Type: Miniature lathe
Length: 31cm/12inch
Power: 100W
Voltage: 24VDC
Applicable materials: lobular red sandalwood, pear, clams and so on
Instruction:
1. Drill holes at both ends of the wood. Put up, behind the shelf on the screw, do not be too tight. Find something knock on the shelf.
2. When the beginning of the round wooden round when the slower. According to the size of the car beads, on both sides of the designated mark. Car beads knife from the Buddha beads to the center to go.
3. After the outline of the outline, and then repair with a repair device.
Note: Buddha beads punch, push forward directly on the line. If you do not wear on the hand holding.

Package Includes:

1x miniature lathe
1x Threaded
1x Saw active table
3x hexagonal fixing pin 1.5mm, 2.0mm, 2.5mm
6x Carving knife

Note:

1.If the user does not have lathe base experience, when used, should follow: low speed, slowly, cautiously and other security operations.
2.The speed can be adjusted in 0-8000R, cut wood should not exceed 4000, grinding can use higher speed.
3.Drill chuck axis, the axis of the wood, the tailstock center axis of the drill should be in a straight line, or need to adjust the nut.
4.If not a cylinder, the speed should be reduced.
5.Tailstock bearing without lock tight.
6. When using a knife, locking the bottom of screw, location should be away from timber 1-1.5cm.
7.If you do not really understand the operation, it is best to consult a professional person.