Digital Clamp Meter Multimeter AC/DC Voltmeter Current Resistance Tester RMS

Description:

High sensitivity voltage and AC current measurement.
Temperature, Frequency, Capacitance, DC microampere, Resistance, LIVE wire check, Dangerous voltage alert.
Measure both DC current and AC current (minimum 1mA by jaws)
Measure microamps μA (minumum 0.1μA by terminals)
Measure AC and DC voltage
Measure frequency
Low impedance voltage measurement
Measure resistance, continuity and capacitance
Measure temperature
Live check function
measurement
Clamp on frequency function
Auto range
Data hold
Auto power off
Back light

Specification:

Display: 6000 counts
DC current: 6A/60A/100A 0.001A/0.01A/0.1A ±(3.0%+5counts)
DC current(uA):0-200uA 0.1uA ±(0.8%+5counts)
AC current: 6A/60A/100A 0.001A/0.01A/0.1A ±(2.5%+5counts)
DC voltage: 6V/60V/600V 0.001V/0.01V/0.1V ±(1.0%+3counts)
AC voltage: 6V/60V/600V 0.001V/0.01V/0.1V ±(1.0%+3counts)
Low impedance LOZ: Max 600V Resolution 0.1V
Resistance:
600/6k/60k/600k/6M ohm 0.1/0.001K/0.01K/0.1K/0.001M ohm ±(1.0%+3counts)
60Mohm 0.01Mohm ±(1.2%+20counts)
Capacitance: 600uF/6000uF 0.1uF/1uF ±(4.0%+3counts)
Frequency: 60Hz/1000Hz 0.1Hz/1Hz ±(1.0%+5counts)
Frequency（by jaws): 60Hz/1000Hz 0.1Hz/1Hz ±(1.0%+5counts)
Buzzer: If the resistance is less than 30Ω, the continuity beeper sounds.
Work Temperature: 0°C~40°C
Storage Temperature: -10°C~50°C
Jaw Capacity: 20mm
Power: 1.5V (AAA) x 2 (not included)
Material: rubber + electronic components
Size: 18 x 4.3 x 3.1/7 x 1.7 x 1.2inch
Probe Cble Length: 96.5CM/38inch
Probe Length: 4cm/1.6inch

Package Includes:

1 Piece Digital Clamp Meter
1 Piece Test Leads
1 Piece User Manual
1 Piece Carrying Case