High Precision Digital DDS Dual-channel Function - 60MHz Signal Generator & UK Plug

FY6600 series Dual-channel Function Signal generator combines multiple functions in one such as Function Signal Generator Arbitrary Waveform Generator Pulse Generator Analog/Digital Modulator VCO Sweep Counter and Frequency Meter etc. The instrument adopts the Direct Digital Synthesizer(DDS) technology and provides stable precise pure and low distortion signals. It's a great testing or measuring instrument for electronics engineers electronic laboratory teaching and researching.Features:Adopt the Direct Digital Synthesizer(DDS) technology and provide stable precise pure and low distortion signals.2.4 inch TFT color LCD with 320*240 resolution simultaneously display parameters and graphics of CH1 and CH2.Use 14-bit high-speed D/A converter chip(5Vpp output quantization error is less than 1mV) 250MSa/s sampling rate and 14bits vertical resolution.Can output up to 97 groups of functions/arbitrary waveform: 33 groups of preset waveform and 64 groups of user-defined waveform.64 groups of arbitrary wave storage function each one of waveform storage depth is 8192 points * 14bits.Various modulation types: AM FM PM ASK FSK and PSK modulations.Sweep Function: linear sweep and logarithmic sweep functions; 0.01s-999.99s sweep time; forward backward and roundtrip sweep directions.VCO Function(Voltage Control Output): voltage controlling frequency/amplitude/offset/duty cycle and PWM modulations.Burst Output Function: there has manual trigger internal CH2 trigger and external trigger for your options. It can output 1~1048575 pulse trains.Frequency Meter Function: Max. frequency workable is 100MHz and Min. frequency workable is 0.01Hz.Counter Function: 2 coupling measure modes including DC coupling and AC coupling.Support two or more signal generators connected to achieve multi-channel output the maximum support 16-channel synchronous output.Completely independent dual channels output synchronizing operation between channels.Precisely adjust the phases of the two channels Precision can be 0.01.High Amplitude Resolution: the minimum amplitude resolution can reach 1mV amplitude range is 0Vpp~20Vpp.Duty-cycle of each channel can be adjusted independently(0.01%-99.99%) the adjusting resolution is 0.01%.-10V~+10V DC offset range offset resolution is 0.001V.Storage Function: can save 20 groups of parameters set by the user and extract at any time.Communication Function: all functions can be controlled by PC program and the communication protocol is open for secondary development.Output Short-circuit Protection: all channels can work more than 60 seconds when the load is short-circuited.Arbitrary Waveform Editing Function: user can edit arbitrary wave on PC and then download to output from the instrument.Specifications: Frequency Parameters Sine Wave Range(Optional) 0Hz~30MHz / 0Hz~50MHz / 0Hz~60MHz Square Wave 0Hz~25MHz Triangle Wave 0Hz~10MHz Ramp Pulse Wave Arbitrary Waveform TTL/COMS 0Hz~20MHz Min. Pulse Width 20ns(Pulse wave minimum width of all models can reach 20ns) Min. Resolution 1?Hz Frequency Accuracy +/-20ppm Frequency Stability +/-1ppm/3 Hours Waveform Parameters Waveform Types Sine Square (Duty Cycle adjustable) Pulse (Pulse width and cycle time can be set accurately) Triangle/Ramp Sawtooth Wave CMOS Four channels TTL DC Half wave Full wave Positive Step Inverse Step Positive Exponent Inverse Exponent Lorenz Pulse Multitone Noise ECG Trapezoidal Pulse Sinc Pulse Narrow Pulse Gauss White Noise AM FM and other 64 sets customer-defined waveform Waveform Length 8192 points * 14bits Sampling Rate 250MSa/s Vertical Resolution 14 Bits Sine Harmonic Suppression 50dBc(1MHz); 45dBc(1MHz~20MHz) Total Harmonic Distortion 0.5% (20Hz~20kHz 0dBm) Square Rise/Fall Time 7ns(VPP5V) Overshoot 5% Duty Cycle 0.01%~99.99% (Resolution 0.01%) Sawtooth Wave Linearity 99% (0.01Hz~10kHz) Output Parameters Amplitude(VPP) Frequency10MHz 10MHzFrequency20MHz Frequency20MHz 1mVpp~20Vpp 1mVpp~10Vpp 1mVpp~5Vpp Resolution 1mV Amplitude Stability +/-0.5%/5 Hours Amplitude Flatness +/-2.5%(10MHz); +/-5%(10MHz) Waveform Output Impedance 50? +/-10% (Typical) Protection All channels can work within 60s under load short-circuit condition DC Offset Offset Range Frequency20MHz: +/-10V; Frequency20MHz: +/-2.5V Offset Resolution 1mV Phase Parameters Phase Range 0~359.99 Phase Resolution 0.01 TTL Output TTL Level Amplitude 3Vpp Fan-out 8 TTL LOAD Rise/Fall Time 10ns COMS Output Low Electric Level 0.3V High Electric Level 1V~10V Rise/Fall Time 18ns Frequency Meter Function Measurement Objects Frequency Period Positive/Negative Pulse Width Duty Cycle Input Voltage Range 2Vpp~20Vpp Frequency Meter Range: 0.01Hz~100MHz; Resolution: 0.01Hz; Sensibility: Gate Time 3 Grades (1S 10S 100S) Adjustable Counter Function Counting Range 0~4294967295 Coupling Mode 2 kinds of Coupling Modes: DC and AC Counting Mode Manual Operation Sweep Function Carrier Waveform Sine Square Ramp Arbitrary (except DC) Sweep Type Linear Sweep or Logarithm Sweep Sweep Direction Forward Backward and Roundtrip Sweep Time 0.01s-999.99s/Step Sweep Objects Frequency Amplitude Offset Duty Cycle Setting Range Starting Position and Finishing Position can be set arbitrarily Sweep Range Decided by Parameters Setting VCO Function(Voltage Control Output) Modulation Signal Range to Input 0~5V VCO Signal Frequency Range 0-1000Hz VCO Control Object Voltage Controlling Frequency(VCF) Voltage Controlling Amplitude Voltage Controlling Offset Voltage Controlling Duty Cycle VCO Special Function Can Amplitude Modulate(AM) or Frequency Modulate(FM) by external analog signal Modulation Function Modulation Type AM FM PM ASK FSK PSK Carrier Waveform Sine Square Triangle Ramp Arbitrary waveform (except DC) AM Source Internal (CH2) / External (VCO IN Port) Modulating Waveform Sine Square Triangle Ramp Arbitrary Waveform Depth 0% to 100% Modulating Frequency Internal :1?Hz~1MHz; External: 1?Hz~2KHz FM Source Internal (CH2) / External (VCO IN Port) Modulating Waveform Sine Square Triangle Ramp Arbitrary Waveform Modulating Frequency Internal :1?Hz~1MHz; External: 1?Hz~2KHz PM Source Internal (CH2) / External (VCO IN Port) Modulating Waveform Sine Square Triangle Ramp Arbitrary Waveform Phase Deviation 0 to 360 Modulating Frequency Internal :1?Hz~1MHz; External: 1?Hz~2KHz ASK Source Internal (CH2) External (ASK IN Port) Manual Modulating Waveform Square with 50% Duty Cycle Key Frequency 1?Hz~10MHz FSK Source Internal (CH2) External (FSK IN Port) Manual Modulating Waveform Square with 50% Duty Cycle Key Frequency 1?Hz~10MHz PSK Source Internal (CH2) External (PSK IN Port) Manual Modulating Waveform Square with 50% Duty Cycle Key Frequency 1?Hz~10MHz Burst Function Carrier Waveform Sine Square Ramp Arbitrary (except DC) Burst Count 1~1048575 Trigger Source Manual Internal External (AC/DC) General Parameters Display Type 2.4 inch TFT Color LCD Save Load Amount 20 Position 01 to 20 (01 for start default value) Interface Interface Type USB Serial Interface Communication Rate 115200bps Communication Protocol Command Line Mode providing communication protocols Technic SMD LSI Reliable and Durable Buzzer Can be turned on/off by setting Power Supply Plug Type UK Plug Power Voltage Range AC100V~240V Environmental Conditions Temperature: 0C~40C; Humidity: 80% Size 19.5 * 17.5 * 7cm / 7.67 * 6.9 * 2.75in Weight 614g / 21.68oz Package Size 24 * 21 * 9.5cm / 9.45 * 8.3 * 3.74in Package Weight 995-1058g / 35.08-37.73oz Package List:1 * DDS Signal Generator1 * CD1 * Power Cable1 * USB Data Cable1 * BNC-BNC Cable2 * BNC-Clip Cable