No result found for your search.
-
-
- Health & Beauty
- General Products
- Electronics
- Smart Device Accessories
- Sports & Outdoors
- Fashion
- Personal Needs
- IC for iPhone
- Watch Accessories
- Others
Need help? Contact us
orders.uniqbuy@gmail.com
Your cart is empty
- Home
- Automobiles
- OP-COM V CAN Code Fault Diagnostic Interface PC Tool for Opel OP-COM V CAN Code Fault Diagnostic Interface PC Tool for Opel
- Description
1) Latest Firmware Version V1.39.
2) Support 2008 Models.
3) Support Saab 9-5 and Saab 9-3 CAN.
4) Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
5) OP-COM is a PC based Opel diagnostic program. This interface can read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
6) The program supports many control units, such as
- Engine
- Automatic Transmission
- ABS
- Airbag
- Engine Cooling module
- Instrument Cluster
- Electronic Climate Control
- Body Control Unit
- Many others...
7) Since Opel uses many pin in the On-Board Diagnostic connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
- PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- PIN6-PIN14
- PIN3-PIN11
- PIN1
- HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
- MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
- SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
8) Fault codes will be shown with all available information:
9) Full fault code text description
10) Full status information (Present, Not present, Intermittent)
11) You can print out, save, or copy the fault codes to any other application.
12) From the fault codes window, you can go directly to the measuring blocks window. The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while
2) Support 2008 Models.
3) Support Saab 9-5 and Saab 9-3 CAN.
4) Covers almost all Opel cars from 1992 - 2008, even new cars with CAN-BUS based diagnostic, such as Vectra-C, Astra-H, Zafira-B.
5) OP-COM is a PC based Opel diagnostic program. This interface can read out and clear fault codes, shows you live data, lets you to perform output test, and supports remote, and key programming.
6) The program supports many control units, such as
- Engine
- Automatic Transmission
- ABS
- Airbag
- Engine Cooling module
- Instrument Cluster
- Electronic Climate Control
- Body Control Unit
- Many others...
7) Since Opel uses many pin in the On-Board Diagnostic connector, the diagnostic interface works as a multiplexer, and selects the appropriate pin for communication.
- PIN3, PIN7, PIN8, PIN12 = Serial Link (ISO9141, KW81, KW82, KWP2000)
- PIN6-PIN14
- PIN3-PIN11
- PIN1
- HSCAN - Dual-wire, High Speed CAN-BUS, 500 kbps
- MSCAN - Dual-wire, Medium Speed CAN-BUS, 95 kbps
- SWCAN - Single-wire, Low Speed CAN-BUS, 33.3 kbps
8) Fault codes will be shown with all available information:
9) Full fault code text description
10) Full status information (Present, Not present, Intermittent)
11) You can print out, save, or copy the fault codes to any other application.
12) From the fault codes window, you can go directly to the measuring blocks window. The program shows you measuring block information on many control module, you can choose anything from the list on your own. The program is capable of showing 8 measuring block parameter simultaneously. The sample rate is depends mostly on the communication protocol. For example, older system, like Omega-B X 25 DT Engine (ISO-9141-2) can be very slow, during communication, while